DIY Teacup Lights

These candles will be perfect for mothers or mother-in-laws as well as aunts, cousins and sisters!

MATERIALS:

• Nested pans
• Partially burned candles
• Candy or candle thermometer
• Tongs
• New wicking
• Teacups
• Wick sustainers
• Wooden skewers
• 
  

STEPS:

1. In a small pan set over a larger pan of simmering water, melt down old candles; clip the thermometer to the upper pot, and keep temperature at about 185 degrees. Remove old wicks with tongs.
2. Cut a piece of wicking to the cup's height plus 2 inches. Clamp one end to a wick sustainer; tie the other end around a skewer. Dip wicking and sustainer into melted wax to coat them. Remove and stick sustainer to cup's bottom.
3. Pour in the wax, stopping 1/2 inch below the cup's rim. Allow wax to set, about 1 hour. The candle will harden with a well in the center. To even it out, use another skewer to prick a circle of holes about 1/16 inch deep around the wick. Pour in melted wax until surface is 1/4 inch below rim. Cut wick.